#filename:	 beam_cen_961223.rdb
# Beam center data file for the data taken during the
# "on-axis" phase of Phase 1 XRCF testing.  Beam cen
# data from Kathy Flanagan, modified as noted.
# Times are shown as well.
# Z values have been corrected for the drift indicated by the zero-order
# data points; all zero-order points have value 33500, therefore.
#
# 21:52, 22:44, 23:39 :
# LEG 0 -318537. 33513. 1.4867
# LEG +1 -311141. 33531. 1.4867
# LEG -1 -325930. 33562. 1.4867
#
# 0:46 and 1:38 :
# MEG 0 -318529. 33579. 1.4867
# MEG +1 -300285. 35092. 1.4867
#
# 2:32, 3:21 :
# HEG 0 -318535. 33610. 1.4867
# HEG +1 -282083. 30259. 1.4867
#
# add 15 to the Y values to have zero-order
# at the same Y location as other HEG measurements
# do this for the LEG +/- 9 and MEG too...
# taken at 6:03 and 8:04:
# LEG -9 -385128. 33695. 1.4867
# LEG +9 -252018. 33611. 1.4867
#
# 9:39, 10:17 :
# HEG -1 -355007. 37002. 1.4867
# HEG 0 -318550. 33668. 1.4867
#
# 11:02 :
# MEG -1 -336792. 32171. 1.4867
#
# ERRORS
# Y and Z errors are (1 sigma).
# Because of Z drift of beam of as much as 22 um/hour
# a Z error of 10 um is used for 20 um pinholes, and
# 20um for 70 um pinholes (LEG +/- 9 orders).
# For Y errors 5 um is used for 20 um pinhole measurements
# and 20 um error for 70 um pinholes (LEG +/- 9 orders).
#
grating	order	Y	Z	E	Yerr	Zerr
S	N	N	N	N	N	N
LEG	0	-318537.	33500.	1.4867	5.0	10.0
LEG	+1	-311141.	33501.	1.4867	5.0	10.0
LEG	-1	-325930.	33517.	1.4867	5.0	10.0
MEG	0	-318529.	33500.	1.4867	5.0	10.0
MEG	+1	-300285.	34997.	1.4867	5.0	10.0
HEG	0	-318535.	33500.	1.4867	5.0	10.0
HEG	+1	-282083.	30144.	1.4867	5.0	10.0
LEG	-9	-385113.	33560.	1.4867	20.0	20.0
LEG	+9	-252003.	33461.	1.4867	20.0	20.0
HEG	0	-318535.	33500.	1.4867	5.0	10.0
HEG	-1	-354992.	36840.	1.4867	5.0	10.0
MEG	-1	-336777.	32001.	1.4867	5.0	10.0